Solutions for Foaming Equipment
Characteristics of steam use of foaming equipment:
1. Foam molding with saturated steam, which requires high steam quality and pressure of 0.5-0.6MPa;
2. The instantaneous use of steam is large, and the traditional steam equipment has high energy consumption and serious pollution;
3. Fully automatic operation, reducing management requirements;
： Kaida steam source advantages :
1. It is not a pressure boiler, and does not need to be submitted for approval and annual inspection.
有汽水分离装置，蒸汽干度高； 2. Turn on the steam within 5 seconds after turning on the machine, and it can be used immediately; Fully automatic intelligent control, which can switch the number of module units to open according to the steam usage. The equipment has its own steam-water separation device, and the steam dryness is high;
3.High energy saving, high thermal efficiency, energy saving than traditional steam equipment;
压力5公斤至6公斤即开即用，无需锅炉房、锅炉工，免去政策法规对企业的影响。 A foaming plant in Ningbo purchased four Kaida M12 steam source units to replace the traditional 1.5-ton coal-fired boilers and 13 sets of foam foaming molding equipment. The pressure is 5 kg to 6 kg and it is ready to use. No boiler room or boiler workers are needed. Impact of policies and regulations on enterprises.